How to take apart the Xbox One controller can be a very confusing task for people who do not know exactly what they are doing. With so many different kinds of Xbox Ones that you can choose from, you really need to know how to remove them before you can start using them again.
The Xbox One controller is made up of two main pieces. The first piece is called the transmitter and the second is called the receiver.
Both of these parts need to be taken apart properly before you are going to be able to put them back together again.
If you do not take these two pieces apart properly then there are a lot of problems that you will encounter when you try to put them back together.
If you make the mistake of trying to remove the transmitter by yourself then you will find that it will be difficult for you to do it correctly.
You will also find that it will be quite dangerous if you take this route as well because you could possibly break a bone when you try to take the pieces apart.
There is a very simple and easy to follow method for you to follow in order to learn how to take apart Xbox One controllers and then put them back together again.
It really does not take long at all and you will find that it is actually much safer to take this route rather than trying to take apart the pieces on your own.
If you follow the simple steps below then you will be able to successfully complete the task of how to take apart Xbox One controllers.
How to Take Apart Xbox One Elite Controller
If you have ever wanted to learn how to take apart your Xbox One Elite controller then read on for more information. First of all, you will need a Phillips screwdriver in order to open your controller.
Once you have your controller open, you can remove all of the screws and plastic pieces that are attached to the controller’s grips.
You can take off the screws that attach the red, blue, and yellow joysticks together. The controller can now be removed from the controller box.
Now, to learn how to take apart the Xbox One Elite controller, you must first give you the basic tutorial that is simple to follow! Slide the red pry bar from your handy toolkit.
Slide this red bar along the metal seam on the grip. Once the bar has moved all the way along the grip, it can be lifted from the grip area.
Then, slide the red pry bar along the side seam. This piece of the Xbox One Elite controller needs to be lifted from its base. You may find that the pry bar will come loose once the base is removed from the grip area.
Once the Xbox One Elite controller has been fully removed, all the screws and pieces that were used to assemble the controller can be carefully taken out.
You can now remove the orange switch and replace it with your own. It is also a good idea to test out the controller if there is any damage.
To do this, you should put the console on its side. Then press the start button. If the console works, then there will be nothing to worry about. If the console does not work, then it means that you have done more damage than you realized!
How to Take Apart Xbox One Controller without Torx
The Xbox One controller can be taken apart by using a Torx screwdriver. You can start by unscrewing the two metal plates in the controller. Remove the black plate at the bottom right corner of the controller.
The red plate on the top of the controller should have the “red ring of death” indicator, which means that it is not in good condition. If this is the case then you will need to get it repaired or buy a new controller.
Another step on how to take apart an Xbox one controller without a Torx screwdriver is to remove the three plastic caps that cover the exposed screw holes on the controller.
How to take apart Xbox One Controller Without a Torx Screwdriver – After this, you need to insert the screws that are provided with the controller into the screws that are provided for the mounting plate.
To avoid getting stuck, it is recommended that you place one or more of the screws that are provided with the controller on the backside of the screwdriver. Now slide the Torx screwdriver under the screw, and make sure that you don’t overexert force.
If you do not know how to remove screws, you need to read through the manual before starting. The guide usually comes with the controller.
You may need to open up the manual, as these guides are sometimes broken when the controller gets damaged or is lost.
Once all screws are removed from the plate, you need to unscrew the two long screws that attach the plate to the screws.
If you are still unsure how to take apart Xbox One Controller Without a Torx Screwdriver, you may want to consult with someone. For additional information on how to take apart an Xbox one controller, see the following guides.
Why Take Apart an Xbox One Controller?
If your Xbox One controller is not working properly, and you have gone through some simple troubleshooting such as checking the batteries or updating the firmware, the next logical step would be taking apart the console to repair the device.
However, there are a number of different methods you can use to remove your console and access the internal parts that are needed to troubleshoot the device.
Before you can do this, however, you must have a working knowledge of how to properly take apart an Xbox One controller.
Here are a few different fixes that involve taking apart your new console, including helpful tips on what to do when you have taken the console apart…
The first thing that you should do if your Xbox One console is working properly, but your controller is not, is to try to take apart the controller yourself by taking a look at the screws underneath it.
You should then find the two screws that connect the joysticks to the console and unscrew them. Next, you should unscrew the two screws that connect the triggers to the front of the console.
Lastly, you should unscrew the two screws that attach the D-pad to the console but remember not to remove any of the screws if you happen to see any sticky residue left on the bottom of the console.
Once you have cleaned out the bottom of your console, you can then proceed to take apart the buttons that are located above the buttons that are located inside the console itself.
This includes removing the backlight and using a pair of tweezers to pry out the backlight itself from the back of the console. Now you need to carefully lift off the faceplate.
After you have done this, you can then separate the faceplate from the faceplate by unscrewing the three screws that are located in between them and then replacing the faceplates with new ones.
Performing Xbox One Controller Repairs
Many people, when they first buy their new Xbox one console, decide to perform Xbox One controller repairs themselves. Although this is a great way to get into the game, it’s best to wait until you have an Xbox repair expert do the repairs for you, and then let them do the repairs.
Doing the repairs yourself could potentially damage your controller. In fact, there are certain areas on your controller that should not be touched at all.
A lot of the Xbox one controller repairs that people do themselves can actually put your controller at risk for further damage.
This is because a lot of the parts that you can use to fix your Xbox are not the right size or right fit for your controller. If you make a simple mistake when you are putting the screws on your controller, it can cause more damage than good.
For example, if you have a thumbstick that is too large for the screw that holds the thumbstick in place, then it can easily crack the screw.
If you put screws on the wrong sized holes, then it can also cause the screws to slip and slide around the hole. This can put you in danger of getting your controller stuck, which would result in you having to call in an Xbox One repair technician to do the repairs for you.
Another thing to keep in mind is that you will have to wait a little bit before you can perform Xbox one controller repairs. The reason that you have to wait is because of the parts that you need to have replaced.
There is no way that you are going to be able to find replacement screws for your controller unless you have a good supply of screws lying around the house.
Even then, most of the time you are going to have to purchase the screws online, and then wait a few days for them to arrive at your door.
Frequently Asked Question (FAQ’s)
How to Take Apart an Xbox One Controller
Want to know how to take apart an Xbox One controllers? Whether your unit is a recent model or older model, here are some helpful hints for you. Safely and easily dismantle your Xbox One control for simple repairs.
How to Take Apart a Xbox One Controller
If you are looking to how to take apart an Xbox one controller, then read on. The Xbox controllers are very popular for many reasons and I think they are a great addition to any gaming system. But how do you get the controller apart? Luckily there are many guides online that can help you in this process. Here are some tips on how to take apart an Xbox one controller:
How to Take Xbox One Controller Apart
Are you wondering how to take Xbox One controller apart for your own use? There are several ways you can go about this but one of the easiest is to buy a pre-owned Xbox One controller. You can always buy brand new ones as well but the price will be very expensive. Here are some useful steps to follow if you want to learn how to take apart the Xbox One controller: